R&S AFQ100A Operating Manual page 344

R&S AFQ100A
MMEMory:MDIRectory <directory_name>
The command creates a new subdirectory in the specified directory. If no directory is specified, a
subdirectory is created in the default directory. This command can also be used to create a directory
tree.
The command triggers an event and therefore has no query form and no *RST value.
Example: MMEM:MDIR 'carrier'
*RST value
-
MMEMory:MOVE <file_source>,<file_destination>
This command renames an existing file if no path is specified for <file_destination>. Otherwise the
file is moved to the specified path and stored under the original file name or, if specified, a new file
name.
It is also possible to specify the path using another parameter. The command is:
MMEMory:MOVE <file_source><msus_source>[,<file_destination>,<msus_destination>]
The command triggers an event and therefore has no query form and no *RST value.
Example: MMEM:MOVE 'test1.savrcl','keep1.savrcl
MMEM:MOVE 'test1.savrcl','\afq_one\keep1.savrcl
*RST value
-
MMEMory:MSIS <msus>
The command sets the drive (or network resource in the case of networks) using <msus> (MSIS =
Mass Storage Identification String). This setting is effective for all MMEMory commands where the
drive is not explicitly specified in the parameter.
Example: MMEM:MSIS 'E:'
*RST value
D:\
1401.3084.32
'creates the subdirectory 'carrier' in the current directory.
Resolution Options
-
'renames the file 'test1.savrcls' as 'keep1.savrcl'.
'moves the file 'test1.savrcl' to the subdirectory 'afq_one' and stores it there
under the name 'keep1.savrcl'.
Resolution Options
-
'selects the memory stick as the default drive.
Resolution Options
-
AFQ Commands - Setup Section
SCPI
Device-specific
SCPI
Compliant
SCPI
Compliant
6.83 E-3