R&S AFQ100A Operating Manual page 277

R&S AFQ100A
To test the query command a dummy file is required which the instrument will generate.
Only the file name has to be entered, the file extension may be omitted. Waveform data is stored
only in files with the specific file extensions *.wv. If this file extension is missing, the instrument will
append it.
This command triggers an event and therefore has no *RST value and no query form.
Example: WAV:DATA 'TEST1.WV',#3767<binary data block>
*RST value
-
[SOURce:]WAVeform:DELete <waveform filename>
The command deletes the specified waveform file. If the file is not on the default path, the path must
be specified at the same time. The file extension may be omitted. Only files with the file extension
*.wv will be deleted.
This command triggers an event and therefore has no *RST value and no query form.
Example: WAV:DEL 'd:\user\wave1.wv'
*RST value
-
[SOURce:]WAVeform:POINts? <waveform filename>
The command queries the number of samples in the waveform file selected using command
WAV:SEL. Only the file name has to be entered. Only files with the file extension *.wv will be read
out.
The command is a query command and therefore has no *RST value.
Example: WAV:POINt?
Response: "401"
*RST value
-
1401.3084.32
'writes the block data to file 'test1.wv'.
Resolution Options
-
'deletes waveform file 'wave1.wv' from the d:\user directory.
Resolution Options
-
'queries the number of I/Q values pairs in the waveform file.
'the waveform file contains 401 I/Q value pairs.
Resolution Options
-
AFQ Commands - Signal Generation
6.16
SCPI
Device-specific
SCPI
Device-specific
SCPI
Device-specific
E-3