R&S AFQ100A Operating Manual page 162

R&S AFQ100A
Save As...
Save
Frequency, Gain,
Phase
1401.3084.32
Opens the window Create List File Which Name? to save the table
under a new name see section
Note:
If a file is selected (marked) the file name is entered automatically
in the entry field File name:. Then the current data will overwrite
the data in the file.
Each table is saved to the hard disk as a separate file with the file
ending *.afg_mfg. The file name and the directory to which the file has
to be saved are user-selectable.
Remote-control command:
SOUR:EQU:MOD:SEL 'new_corr_MOD'
Saves the edited table under its current name.
Remote-control command: n.a.
(The table is saved automatically after the values have been entered.)
Enters the frequency, gain and phase values for the equalizer data
tables. The charts in the I, Q and modulator window display the curves
generated from these data tables.
The selected modulator's frequency entry mode applies to its data
table.
Remote-control commands:
SOUR:EQU:MOD:FREQ 10000,20000,30000
SOUR:EQU:MOD:GAIN 0,-1,-2
SOUR:EQU:MOD:PHAS 0,45,90
4.51
Equalizer Block
File Select Windows, on page 4.108.
E-3