R&S AFQ100A Operating Manual page 356

R&S AFQ100A
SYSTem:STARtup:COMPlete?
This command queries the booting process. If start-up is completed the instrument is ready for
operation.
The command is a query command and therefore has no *RST value.
Example: SYSTem:STARtup:COMPlete?
*RST value
SYSTem:TIME 0...23,0...59,0...59
The command sets the time for the instrument-internal clock.
Example: SYST:TIME 12,0,0
*RST value
SYSTem:VERSion?
The command queries the SCPI version with which the instrument complies.
The command is a query command and therefore has no *RST value.
Example: SYST:VERS?
Response: 1996
*RST value
-
1401.3084.32
'queries the state of the start-up process.
Resolution Options
-
'sets the time to precisely 12 pm.
Resolution Options
-
'queries the SCPI version.
'the instrument complies with the version from 1996.
Resolution Options
-
AFQ Commands - Setup Section
SCPI
Compliant
SCPI
Compliant
SCPI
Compliant
6.95 E-3