File Management - R&S AFQ100A Operating Manual

R&S AFQ100A
File list
File Name
Select
Save

File Management

1401.3084.32
Displays the files which are in the selected directory. Only the relevant
files of the individual functions are displayed without file extensions.
Remote-control command:
MMEM:CAT?
(New list only)
Enter the file name of the file without file extension. This file is then
created. If a file is highlighted, it is overwritten when the file is stored.
Remote-control command: n.a.
(Load waveform, create test signal and select list dialogs)
Loads the data of the selected file and closes the window.
Remote-control command: -
(New list only)
Stores the current data under the specified path. The file extension is
different for each list type and is assigned automatically by the
system.
Remote-control command: -
Calls the File Management dialog.
Directories can be created and files managed in this dialog (see the
section File Management ,
Remote-control command: -
4.109
Storing and Loading Instrument Data
on page 4.110).
E-3