R&S AFQ100A Operating Manual page 350

R&S AFQ100A
STATus:QUEStionable:EVENt?
The command queries the content of the EVENt part of the STATus:QUEStionable register. This
part contains information on the actions performed in the instrument since the last readout. The
content of the EVENt part is deleted after being read out.
The command is a query command and therefore has no *RST value.
Example: STAT:OPER:EVEN?
*RST value
-
STATus:QUEue[:NEXT]?
The command queries the oldest entry in the error queue and then deletes it. Positive error numbers
denote device-specific errors, and negative error numbers denote error messages defined by SCPI
(see chapter 9 Error
command is identical to SYSTem:ERRor?.
The command is a query command and therefore has no *RST value.
Example: STAT:QUE?
Response: "0" , no error
*RST value
-
1401.3084.32
'queries the Status:Questionable:Event register.
Resolution Options
-
Messages). If the error queue is empty, 0 ("No error") is returned. The
'queries the oldest entry in the error queue.
'no errors have occurred since the error queue was last read out.
Resolution Options
-
AFQ Commands - Setup Section
SCPI
Compliant
SCPI
Compliant
6.89 E-3