Editors; Equalizer List Editor - R&S AFQ100A Operating Manual

R&S AFQ100A

Editors

The GUI provides user-friendly editors for defining data lists.
The lists are saved to files and may thus have any length. The file name of the lists and the directory to
which the files are saved are user-selectable. The file prefix is different for each list type and is
permanently assigned by the system (see section

Equalizer List Editor

The Equalizer menus provide the editor for defining the frequency/gain/phase value triplets. The
associated button
Edit Data...
To select another one, click on
List or the New List dialog, respectively.
The selected list is displayed. If no list has been selected, a blank list of only one row is displayed.
The value pairs are entered in the Frequency/Hz, Gain/dB, and Phase/deg table columns. A
blank row is inserted at the end of the list.
New rows can be inserted anywhere in the table by means of the Insert/Fill Row(s)... button.
After the list has been edited, i.e. changed, it can be saved under its current name by means of the
Save button, or under a new name by means of the Save as... button. Only complete value pairs
are taken into consideration; rows containing an entry in only one column are ignored.
An existing list can be edited in the insert or overwrite mode.
A new list can be created under a new name either by generating a blank file in the file select menu
(see section "File Management" on page 3.25) or by changing an existing list which will then be
saved under a new name.
1401.3078.62
"File
calls up the list editor to edit the current list whose file name is displayed.
, then
List Data... Select List...
3.21
Management" on page 3.25).
or which will open the Select
New List...
Editors
E-3