R&S AFQ100A Operating Manual page 34

R&S AFQ100A
Setting up the Instrument
CAUTION Safe operation with support feet!
Cleaning the Outside and Storing
What is necessary is essentially the cleaning of the instrument.
NOTICE Instrument damage caused by cleaning agents!
Prior to cleaning, disconnect the product from the AC supply.
Cleaning agents contain substances that may damage the instrument, e.g. solvent-
containing cleaning agents may damage the front panel labeling or plastic parts.
Never use chemical cleaning agents such as solvents (e.g. diluent for lacquers,
thinners, acetone, alcohol, etc), or acids, bases, or other substances.
Use a soft, non-linting cloth to suitably clean the outside of the instrument.
1401.3078.62
Stacked instruments may slip off.
Secure stacked instruments against slipping (e.g. by locking the feet to the top of
the front-panel frame).
The feet must be fully folded in or folded out. Only then a stable position of the
instrument and reliable operation can be ensured. The uniform pressure on the
folded-out feet must not exceed 500 N (weight of instrument and of equipment
stacked on top).
When using the instrument with expanded feet, the feet might collapse and fold in.
Do not shift the instrument with the feet out.
<500N
1.14
Putting into Operation
E-3