Select / Save Instrument Settings - File Management - R&S AFQ100A Operating Manual

R&S AFQ100A

Select / Save Instrument Settings - File Management

The File menu offers access to functions for loading or saving instrument settings.
New
Clears the current instrument settings. All devices are reset and conform to the
default settings as it is called by the *RST command.
Open ...
Opens the window Choose a file to open which is similar to a Windows explorer
user interface. Stored instrument settings can be recalled by selecting a setting file.
1.
2.
3.
4.
5.
6.
1401.3078.62
Click on the selection list Look in: or move the cursor with the aid of the
key to activate the selection list.
Click on the pop-up button or press the cursor down key to pop up the selection
list.
The available drives are listed.
Mark the drive where the setting file is stored.
The directories and files are displayed in the area below.
Shift the entry focus to the area underneath the Look in: selection list and
select the directory.
Similar to Windows user interfaces the Look in: selection list changes and
displayes the currently selected directory.
Only the relevant files of type Instrument State are available and therefore only
the files with the file extension *.savrcl (Save/Recall Files) are displayed. This
suffix is preset in the field Files of type.
Select the file.
The file name is entered automatically in the entry field File name.
Press the key or click on the Open button to load the instrument settings.
Enter
The window is closed automatically.
3.26
File Management
Tab
E-3