R&S AFQ100A Operating Manual page 68

R&S AFQ100A
Cut Manual Remote Control Connection via Ultr@VNC
The connection can be cut either on the R&S AFQ or on the external PC. Cutting the connection does
not disable it. It can be established again any time.
Cutting the connection on the modulation generator
Cutting the connection requires external keyboard, mouse and monitor.
1. Open the start menu with the Windows key or the
2. Right-click on the VNC icon on the task bar. The context menu opens.
3. Select Kill all clients
The connection is cut, a message on the external PC informs about the disconnection. The VNC icon
changes color.
Cutting the connection on the external Linux/Unix PC
1. Either close the internet browser or
close the modulation generator window
The connection is disabled, the VNC icon on the task bar
Cutting the connection on the external Windows PC:
1. Close the VNC Viewer program
The connection is cut, the VNC icon on the task bar
Disable Manual Remote Control Connection via Ultr@VNC
The connection can be disabled by removing the program on the R&S AFQ or by deactivating the VNC
Server service in the Control Panel.
Removing the VNC program:
1. Open the start menu with the Windows key or the
2. Open the Control Panel menu
3. Select Add or Remove Programs
4. Remove the VNC program.
The connection is disabled, the VNC icon on the task bar
Deactivating the VNC Server service
1. Open the start menu with the Windows key or the
2. Open the Control Panel menu
3. Select Services
4. Deactivate the VNC Server service.
The connection is disabled, the VNC icon on the task bar
1401.3078.62
Manual Remote Control via an External Controller
+
Ctrl Esc
off the R&S AFQ changes color.
off the R&S AFQ changes color.
+
Ctrl Esc
of the R&S AFQ disappears.
+
Ctrl Esc
of the R&S AFQ disappears.
1.48
key combination.
key combination.
key combination.
E-3