Factory Preset - Setup Factory Preset - R&S AFQ100A Operating Manual

R&S AFQ100A
USB Device
LAN Connection
Security Password
Accept - Security
Settings

Factory Preset - Setup Factory Preset

The Factory Preset dialog provides a function to reset the instrument's settings to their factory state.
This function is activated by pressing the Execute Factory Preset button.
1401.3084.32
Enables/disables the USB interfaces. Any device connected to the
USB interface is not recognized by the instrument when the interface
is disabled.
The setting requires the entry of the security password and is only
accepted after the Accept button is pressed.
Remote-control commands: n.a.
Enables/disables the LAN interfaces. Any device connected to the
LAN interface is not recognized by the instrument when the interface
is disabled.
The setting requires the entry of the security password and is only
accepted after the Accept button is pressed.
Remote-control commands: n.a.
Enters the security password that is required to enable or disabled the
LAN or USB interface. Default is '123456'.
All settings are only accepted after the Accept button is pressed.
Remote-control commands: n.a.
Accepts a new entry or selection and changes the settings
accordingly.
Remote-control command: n.a.
4.100
General Instrument Settings
E-3