R&S AFQ100A Operating Manual page 330

R&S AFQ100A
BERT:SETup:TYPE PRBS9 | PRBS11 | PRBS15 | PRBS16 | PRBS20 | PRBS21 | PRBS23
Selects the PRBS sequence. The data generated by the PRBS generator is used as a reference for
the measurement.
Example: BERT:SET:TYPE PRBS15
*RST value
PRBS9
BERT:STARt
Starts a continuous measurement.
This command triggers an event and hence has no query and no *RST value.
Example: BERT:STAR
*RST value Resolution
AUTO -
BERT:STATe
Switches on/off the BERT measurement. Depending on the selected mode, either a continuous
measurement (BERT:SEQ AUTO) or a single measurement (BERT:SEQ SING) is carried out. A
single measurement must be triggered (:TRIG:BERT).
Example: BERT:SEQ SING
BERT:STAT ON
TRIG:BERT
*RST value Resolution
OFF -
1401.3084.32
'sets a pseudo random binary sequence consisting of 32767 bits.
Resolution Options
'starts a continuous measurement.
Options
'selects a single measurement.
'switches the BER measurement on.
'starts the single measurement.
Options
AFQ Commands - Signal Generation
Dependencies
These commands automatically set
BERT:SEQuence
to
and
BERT:STATe
to
Dependencies
These commands are automatically
set to
BERT:STARt
and to
BERT:STOP
6.69
SCPI
Device-specific
SCPI
Device-specific
AUTO
ON
SCPI
Device-specific
by
ON
by
OFF
E-3