Cluster-Snmp-Agent Group V3 - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:

Table of Contents

write: Indicates that the community has read-write access right to MIB objects, that is, an SNMP NMS is

capable of configuring the devices when it uses this community name to access the agent.

community-name: Community name, a string of 1 to 27 characters.

view-name: MIB view name, a string of 1 to 32 characters. The default view is ViewDefault.

Use the cluster-snmp-agent community command to create a public SNMP community for the

Use the undo cluster-snmp-agent community command to remove the configuration.

By default, no public SNMP community is configured for a cluster.

You can use this command only in cluster view on the management device to create only one

public community for the cluster.

When you configure this command on the management device, the configuration is synchronized

to the member devices that have passed the authentication; when a new member device passes

the authentication, this configuration is synchronized to the new member automatically. If a

community with the same name already exists, the new configuration will overwrite the old one.

If a member device leaves the cluster, the synchronized SNMP configurations will not be removed.

For the SNMP configurations, refer to the SNMP-RMON Operation part in this manual.

# On the management device, create a public SNMP community with the name of access, allowing

read-only access right using this community name.

<aaa_0.Sysname> system-view

System View: return to User View with Ctrl+Z.

[aaa_0.Sysname] cluster

[aaa_0.Sysname-cluster] cluster-snmp-agent community read access

cluster-snmp-agent group v3

cluster-snmp-agent group v3 group-name [ authentication | privacy ] [ read-view read-view ]

[ write-view write-view ] [notify-view notify-view ]

undo cluster-snmp-agent group v3 group-name [ authentication | privacy ]

Cluster view

Table of Contents