H3C S3100 Series Command Manual page 1100

Field
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
Location format
Location Information
PoE PSE power source
PoE service type
Port PSE Priority
Port available power value
Unknown basic TLV
TLV type
Name of VLAN 1
Indicates whether auto-negotiation is supported.
State of auto-negotiation
Current speed and duplex state
PoE device type, which can be:
PSE: power sourcing equipment
PD: powered device
Indicates whether or not the device can operate as a PSE.
Indicates whether or not the device is operating as a PSE.
Indicates whether or not the PSE-PD pair control is available.
PoE mode, which can be
.
(PoE via spare lines)
Port power classification of the PD, which can be the following:
Class0
Class1
Class2
Class3
Class4
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not
enabled.
Maximum frame size supported
Location information format, which can be:
Invalid, indicating the format of the location information is
invalid.
Coordinate-based LCI, indicating the location information is
coordinate-based.
Civic Address LCI, indicating normal address information.
ECS ELIN, indicating a telephone for urgencies.
Location information
PSE type, which can be:
power
Primary, indicating a primary power supply
Backup, indicating a backup power supply
PoE service type
PoE power supply priority of PSE ports
Unknown
Critical
High
Low
Available PoE power on PSE ports, in watts
Unknown basic TLV
Unknown basic TLV type
1-8
Description
Signal (PoE via signal lines) or Spare
, which can be: