Display Boot-Loader - H3C S3100 Series Command Manual

The configuration of the main or backup attribute for a Web file takes effect immediately without
restarting the device.
After you upgrade a Web file, you need to specify the new Web file in the Boot menu after restarting
the switch or specify a new Web file by using the boot web-package command. Otherwise, the
Web server cannot function normally.
Related commands: display web package
Example
# Configure the Web file named boot.web to be with the main attribute.
<Sysname> boot web-package boot.web main

display boot-loader

Syntax
display boot-loader [ unit unit-id ]
View
Any view
Parameter
unit unit-id: Specifies the unit ID of a switch. You cannot choose any other number except 1 for S3100
series Ethernet switches.
Description
Use the display boot-loader command to display the information about the APP startup files of the
device. Displayed information includes the current app startup file name, and the main and backup app
startup files to be used when the switch starts up next time.
Example
# Display the information about the app startup files.
<Sysname> display boot-loader unit 1
Unit 1
The current boot app is: switch.bin
The main boot app is:
The backup boot app is:
switch.bin
switchbak.bin
1-16