Schedule Reboot Delay - H3C S3100 Series Command Manual

mm/dd/yyyy or yyyy/mm/dd: Reboot date, where yyyy (year) ranges from 2,000 to 2,099, mm (month)
ranges from 1 to 12, and the range of dd (day) depends on the specific month. You cannot set the date
30 days later than the system current date.
Description
Use the schedule reboot at command to schedule a reboot on the current switch and set the reboot
date and time.
Use the undo schedule reboot command to cancel the scheduled reboot.
By default, no scheduled reboot is set on the switch.
The switch timer can be set to a precision of one minute, that is, the switch will reboot within one minute
after the specified reboot date and time.
After you execute the schedule reboot at command with a specified future date, the switch will reboot
at the specified time with at most one minute delay.
After you execute the schedule reboot at command without specifying a date, the switch will:
Reboot at the specified time on the current day if the specified time is later than the current time.
Reboot at the specified time on the next day if the specified time is earlier than the current time.
After you execute the command, the system will prompt you to confirm. Enter "Y" or "y" for your setting
to take effect, and your setting will overwrite the previous one (if available).
If you adjust the system time by the clock command after executing the schedule reboot at command,
the schedule reboot at command will be invalid and the scheduled reboot will not happen.
Related command: reboot, display schedule reboot.
Example
# Suppose the current time is 05:06, schedule a reboot so that the switch reboots at 22:00 on the
current day.
<Sysname> schedule reboot at 22:00
Reboot system at 22:00 2000/04/02(in 22 hours and 0 minutes)
confirm?[Y/N]:y
<Sysname>

schedule reboot delay

Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
View
User view
3-14