Display Ip Host - H3C S3100 Series Command Manual

D:Dynamic
IPv4 DNS Servers :
Domain-server Type IP Address
1 S
IPv6 DNS Servers :
Table 1-3 Description on the fields of the display dns server command
Field
Type
IPv4 DNS Servers
IPv6 DNS Servers
Domain-server
For details about IPv6 DNS, refer to IPv6 Management Command.

display ip host

Syntax
display ip host
View
Any view
Parameters
None
Description
Use the display ip host command to display mappings between host names and IP addresses in the
static DNS database.
Examples
# Display mappings between host names and IP addresses in the static DNS database.
<Sysname> display ip host
Host
host.com
S:Static
192.168.0.4
Type of the DNS server. S indicates the DNS server is specified
manually, while D indicates the DNS server information is obtained
dynamically through DHCP or other protocols.
IPv4 DNS server
IPv6 DNS server
Number of the DNS server, which is assigned automatically by the
system and starts from 1. Such numbering for IPv4 DNS servers is
independent of that for IPv6 ones.
Age
0
Description
Flags Address
static 192.168.0.38
1-3