H3C S3100 Series Command Manual page 991

Negative SD Square Sum:0
SD lost packets number:0
SD packet lost in test:0%
Unknown result lost packet number:0
Table 1-8 Description on fields in the output of the display hwping statistic command
Start time
Lifetime
Send operation times
Receive response times
Min/Max/Average Round Trip Time
Square-Sum of Round Trip Time
Packet lost in test
Disconnect operation number
Operation timeout number
System busy operation number
Connection fail number
Operation sequence errors
Drop operation number
Other operation errors
Min Positive SD (DS)
Max Positive SD (DS)
Positive SD (DS)
number/sum/average/square sum
Min Negative SD (DS)
Max Negative SD (DS)
Negative SD (DS)
number/sum/average/square sum
SD (DS) lost packets number
SD (DS) packet lost in test
Unknown result lost packet number
dns-server
Syntax
dns-server ip-address
Field
The number of the sent test packets.
The number of successful test attempts
The number of timeout in a test
The number of test failures due to busy system
The number of other operation errors
The number of the lost packets for unknown reason
Negative DS Square Sum:0
DS lost packet number:0
DS packet lost in test:0%
The time when a test starts
The time that a test lasts
Roundtrip time in its minimum, maximum, and average
The square sum of roundtrip time
The number of lost packets in a test
The number of forcible disconnections performed by the opposite
end
The number of connection failures to the opposite end
The number of received disordered packets
The number of failures in allocating system resource
The jitter value from source to destination (destination to source) is
the minimum of positive value
The jitter value from source to destination (destination to source) is
the maximum of positive value
The jitter value from source to destination (destination to source) is
the number/sum/average/square sum of positive jitter values
The jitter value from source to destination (destination to source) is
the minimum of negative value
The jitter value from source to destination (destination to source) is
the maximum of negative value
The jitter value from source to destination (destination to source) is
the number/sum/average/square sum of negative jitter values
The number of the lost packets from source to destination
(destination to source)
This value has nothing to do with NTP synchronization.
Packet loss ratio from source to destination (destination to source)
in one test
This value has nothing to do with NTP synchronization.
1-12
Description