Habp Enable; Habp Server Vlan - H3C S3100 Series Command Manual

Table 3-3 Description on the fields of the display habp traffic command
Field
Packets output
Input
ID error
Type error
Version error
Sent failed

habp enable

Syntax
habp enable
undo habp enable
View
System view
Parameter
None
Description
Use the habp enable command to enable HABP for a switch.
Use the undo habp enable command to disable HABP for a switch.
By default, HABP is enabled on a switch.
If an 802.1x-enabled switch does not have HABP enabled, it cannot manage the switches attached to it.
So, you need to enable HABP on specific switches in a network with 802.1x enabled.
Example
# Enable HABP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] habp enable

habp server vlan

Syntax
habp server vlan vlan-id
undo habp server
View
System view
Number of the HABP packets sent
Number of the HABP packets received
Number of the HABP packets with ID errors
Number of the HABP packets with type errors
Number of the HABP packets with version errors
Number of the HABP packets that failed to be sent
3-3
Description