Enhanced Cluster Feature Configuration Commands; Black-List - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:

Table of Contents

Tracing MAC address 000f-e232-0005 in vlan 1

1 000f-e232-0001

2 000f-e232-0002

3 000f-e232-0003

4 000f-e232-0005

Enhanced Cluster Feature Configuration Commands

black-list add-mac mac-address

black-list delete-mac { all | mac-address }

Cluster view

mac-address: MAC address of the device to be added to the blacklist. The format is H-H-H, for example,

0100-0498-e001.

all: Deletes all MAC address in the current cluster blacklist.

Use the black-list add-mac command to add the specified MAC address to the cluster blacklist, so that

the device with the specified MAC address cannot join the cluster.

Use the black-list delete-mac command to remove all the MAC addresses or the specified MAC

address from the current cluster blacklist, so that all devices or the device with the specified MAC

address can join the cluster.

By default, no MAC address is added to the cluster blacklist.

You can only use this command on the cluster administrative device.

If the device to be added to the blacklist is a member of the cluster, the execution of the black-list

add-mac command will remove the device from the cluster and then add it to the cluster blacklist. In this

case, the black-list add-mac command is equivalent to the delete-member member-id to-black-list

# Add the device with the MAC address 0010-3500-e001 to the blacklist.

<aaa_0.Sysname> system-view

Enter system view, return to user view with Ctrl+Z.

[aaa_0.Sysname] cluster

Ethernet1/0/2

Ethernet1/0/7

Ethernet1/0/4

Table of Contents