Display Ipv6 Source Static Binding; Display Ipv6 Statistics - H3C S3100 Series Command Manual

socket state
SOCK_DGRAM
SOCK_RAW

display ipv6 source static binding

Syntax
display ipv6 source static binding [ vlan vlan-id | interface interface-type interface-number | unit
unit-id ]
View
Any view
Parameters
vlan-id: ID of the VLAN whose IPv6 static binding entries are to be displayed.
interface-type interface-number: Type and number of the port whose IP static binding entries are to be
displayed.
unit-id: Unit ID of a device.
Description
Use the display ipv6 source static binding command to display the IPv6 static binding entries
configured. If you specify a VLAN, all the IPv6 static binding entries for the specified VLAN will be
displayed. If you specify a port, all the IPv6 static binding entries for the specified port will be displayed.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all IPv6 static binding entries configured.
<Sysname> display ipv6 source static binding
Type IP Address
==== ========================= =============== ==== ===== =================
S 2001::1
S 1::1
S 1::2
--- 3 static binding item(s) found

display ipv6 statistics

Syntax
display ipv6 statistics
View
Any view
Field
MAC Address
0001-0203-0406
0015-e20f-0101
0001-0001-0001
State of the socket
UDP socket
Raw IP socket
VLAN State Interface
---- True
---- True
---- True
---
1-17
Description
Ethernet1/0/2
Ethernet1/0/3
Ethernet1/0/2