Dot1X Re-Authenticate - H3C S3100 Series Command Manual

Description
Use the dot1x retry-version-max command to set the maximum number of times that a switch sends
version request packets to a user.
Use the undo dot1x retry-version-max command to revert to the default value.
By default, a switch sends version request packets to a user for up to 3 times.
After a switch sends a version request packet to a user, it sends another version request packet if it
does receive response from the user after a specific period of time (as determined by the client version
request timer). When the number set by this command has reached and there is still no response from
the user, the switch continues the following authentication procedures without sending version requests.
This command applies to all the ports with the version checking function enabled.
Related commands: display dot1x, dot1x timer.
Example
# Configure the maximum number of times that the switch sends version request packets to be 6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x retry-version-max 6

dot1x re-authenticate

Syntax
dot1x re-authenticate [ interface interface-list ]
undo dot1x re-authenticate [ interface interface-list ]
View
System view/Ethernet port view
Parameter
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Description
Use the dot1x re-authenticate command to enable 802.1x re-authentication on specific ports or on all
ports of the switch.
Use the undo dot1x re-authenticate command to disable 802.1x re-authentication on specific ports or
on all ports of the switch.
By default, 802.1x re-authentication is disabled on all ports.
In system view:
If you do not specify the interface-list argument, this command will enable 802.1x re-authentication
on all ports.
If you specify the interface-list argument, the command will enable 802.1x on the specified ports.
1-16