H3C S3100 Series Command Manual page 1183

cfd md
Syntax
cfd md md-name level level-value
undo cfd md md-name
View
System view
Default Level
2: System level
Parameters
md md-name: Specifies the name of an MD, which is a string of 1 to 43 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
level level-value: Specifies an MD level, ranging from 0 to 7.
Description
Use the cfd md command to create an MD.
Use the undo cfd md command to delete an MD.
By default, no MD is created.
Note that:
You can create only one MD with a specific level. MD cannot be created if you enter an invalid MD
name or an existing MD name.
When deleting an MD, you will also delete the configurations related to that MD.
Examples
# Create an MD named test_md, with its level being 3.
<Sysname> system-view
[Sysname] cfd md test_md level 3
cfd mep
Syntax
cfd mep mep-id service-instance instance-id { inbound | outbound }
undo cfd mep mep-id service-instance instance-id
View
Ethernet interface view
Default Level
2: System level
Parameters
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
inbound: Creates an inward-facing MEP.
outbound: Creates an outward-facing MEP.
1-8