H3C S3100 Series Command Manual page 1165

Error Running Total
Table 1-6 display oam link-event remote command output description
Field
Port
Link Status
OAMLocalErrFrameEvent
oam enable
Syntax
oam enable
undo oam enable
View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the oam enable command to enable Ethernet OAM on the Ethernet port.
Use the undo oam enable command to disable Ethernet OAM on the Ethernet port.
By default, Ethernet OAM is disabled on all Ethernet ports.
Examples
# Enable OAM on port Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet1/0/1
[Sysname-Ethernet1/0/1] oam enable
: 35 Event Running Total
Port index
Link status
Information about remote errored frame events.
Event Time Stamp: Time when an errored frame event occurred (in
100 milliseconds).
Errored Frame Window: Error frame detection interval (in 100
milliseconds).
Errored Frame Threshold: Error threshold that triggers an errored
frame event.
Errored Frame: The number of detected error frames over the
specific detection interval.
Error Running Total: The total number of error frames.
Event Running Total: The total number of errored frame events that
have occurred.
1-9
: 17
Description