H3C S3100 Series Command Manual page 905

Example
# Display the operation status of information center, the configuration of information channels, the
format of time stamp of the current system.
<Sysname> display info-center
Information Center: enabled
Log host:
the interface name of the source address : Vlan-interface1
192.168.0.2, channel number : 2, channel name : loghost
language : english, host facility local : 7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size : 1024, current buffer size : 512,
current messages : 512, channel number : 4, channel name : logbuffer
dropped messages : 0, overwritten messages : 586
Trap buffer:
enabled,max buffer size : 1024, current buffer size : 256,
current messages : 5, channel number : 3, channel name : trapbuffer
dropped messages : 0, overwritten messages : 0
Information timestamp setting:
log - date, trap - date, debug - boot
Table 1-1 Description on the fields of the display info-center command
Field
Information Center
Log host
Console
Monitor
SNMP Agent
Log buffer
Trap buffer
Information timestamp
setting:
Status of the information center: enabled/disabled
Information about the log host, including its IP address, name and number of
information channel, language and level of the log host
Information about the console port, including name and number of its information
channel
Information about the monitor port, including name and number of its information
channel
Information about SNMP Agent, including name and number of its information
channel
Information about the log buffer, including its state (enabled or disabled), its
maximum size, current size, current messages, information channel name and
number, number of dropped messages, and number of overwritten messages
Information about the trap buffer, including its state (enabled or disabled),
maximum size, current size, current messages, channel number and name,
number of dropped messages, and number of overwritten messages
Information about the time stamp setting, showing the time stamp format of the
log, trap and debugging information
1-2
Description