Description - H3C S3100 Series Command Manual

description

Syntax
description string
undo description
View
HWPing test group view
Parameters
string: Brief description about a test operation. By default, no description is configured.
Description
Use the description command to briefly describe a test operation.
Use the undo description command to delete the configured description.
Examples
# Describe a test group as "icmp-test".
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] description icmp-test
destination-ip
Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameters
ip-address: Destination IP address of an HWPing (pronounced Hua'Wei Ping) test.
Description
Use the destination-ip command to configure a destination IP address of an HWPing test.
Use the undo destination-ip command to remove the configured destination IP address.
By default, no destination IP address is configured for an HWPing test.
Related commands: destination-port.
The destination address can be an IP address or a host name in HTTP test, while in other types of tests,
it must be an IP address.
Examples
# Set the destination IP address of an ICMP test to 169.254.10.3.
<Sysname> system-view
1-4