H3C S3100 Series Command Manual page 1150

Parameters
policy-name: SSL server policy name, a case-insensitive string of 1 to 16 characters, which cannot be
"a", "al" and "all".
all: Specifies all SSL server policies.
Description
Use the ssl server-policy command to create an SSL server policy and enter its view.
Use the undo ssl server-policy command to remove a specified or all SSL server policies.
Note that you cannot delete an SSL server policy that has been associated with one or more application
layer protocols.
Related commands: display ssl server-policy.
Examples
# Create an SSL server policy named policy1 and enter its view.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1]
version
Syntax
version { ssl3.0 | tls1.0 }
undo version
View
SSL client policy view
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
Description
Use the version command to specify the SSL protocol version for an SSL client policy.
Use the undo version command to restore the default.
By default, the SSL protocol version for an SSL client policy is TLS 1.0.
Related commands: display ssl client-policy.
Examples
# Specify the SSL protocol version for SSL client policy policy1 as SSL 3.0.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] version ssl3.0
1-9