Nbns-List - H3C S3100 Series Command Manual

gateway-list
Syntax
gateway-list ip-address&<1-8>
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameters
ip-address&<1-8>: IP address of a gateway. &<1-8> means you can provide up to eight gateway IP
addresses. When inputting more than one IP address, separate two neighboring IP addresses with a
space.
all: Specifies all configured gateway IP addresses.
Description
Use the gateway-list command to configure one or multiple gateway IP addresses in the DHCP global
address pool for the DHCP client.
Use the undo gateway-list command to remove one or all the configured gateway IP addresses
configured for the DHCP client.
By default, no gateway IP address is configured.
If you execute the gateway-list command repeatedly, the new configuration overwrites the previous
one.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Configure the gateway IP address 10.110.1.99 in the DHCP global address pool 0 for the client.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] gateway-list 10.110.1.99

nbns-list

Syntax
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameters
ip-address&<1-8>: IP address of a WINS server. &<1-8> means you can provide up to eight WINS
server IP addresses. When inputting more than one IP address, separate two neighboring IP addresses
with a space.
1-29