H3C S3100 Series Command Manual page 1200

Table 1-11 display cfd service-instance command output description
2 service instance(s) are configured.
Service instance 5
Maintenance domain
Maintenance association:
Level
VLAN
MIP rule
CCM interval
MEP ID
Interface
Direction
display cfd status
Syntax
display cfd status
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display cfd status command to display the status of CFD (enabled or disabled).
Examples
# Display the status of CFD.
<Sysname> display cfd status
CFD is enabled.
display cfd version
Syntax
display cfd version
View
Any view
Default Level
1: Monitor level
Field
Number of service instance configured.
Service instance ID
MD of the service instance
MA of the service instances
MD level
VLAN that the MA belongs to
MIP generation rules configured on service instance
Interval to send CCMs
ID of MEPs configured on the service instance
Interface of the MEP configured on the service instance
Direction of the MEPs configured on the service instance
1-25
Description