H3C S3100 Series Command Manual page 973

1
VLAN Mapping Configuration Commands
VLAN mapping is only applicable to S3100-EI series switches among the S3100 series.
One-to-One VLAN Mapping Configuration Commands
vlan-mapping
Syntax
vlan-mapping vlan old-vlan-id remark new-vlan-id
undo vlan-mapping vlan old-vlan-id
View
System view, Ethernet port view
Parameter
vlan old-vlan-id: Specifies the original VLAN ID for one-to-one VLAN mapping. The old-vlan-id
argument is in the range of 1 to 4094.
remark new-vlan-id: Specifies the target VLAN ID for one-to-one VLAN mapping. The new-vlan-id
argument is in the range of 1 to 4094.
Description
Use the vlan-mapping command in system view to define a global one-to-one VLAN mapping rule. A
one-to-one VLAN mapping rule maps the VLAN tag of a specific VLAN carried in packets to another
one.
Use the vlan-mapping command in Ethernet port view to define a one-to-one VLAN mapping rule on
the current port and enable one-to-one VLAN mapping for the port.
Use the undo vlan-mapping command in system view to remove a one-to-one VLAN mapping rule.
Use the undo vlan-mapping command in Ethernet port view to remove a one-to-one VLAN mapping
rule and disable one-to-one VLAN mapping on the current port.
By default, no global or port-level one-to-one VLAN mapping rule is defined.
1-1