H3C S3100 Series Command Manual page 231

MAC ADDR
000f-e20f-0101
# Display the MAC address entries for the port Ethernet 1/0/4.
<Sysname> display mac-address interface Ethernet 1/0/4
MAC ADDR
000d-88f6-44ba
000d-88f7-9f7d
000d-88f7-b094
000f-e200-00cc
000f-e200-2201
000f-e207-f2e0
000f-e209-ecf9
--- 7 mac address(es) found on port Ethernet1/0/4 ---
# Display the total number of MAC address entries for VLAN 2.
<Sysname> display mac-address vlan 2 count
9 mac address(es) found in vlan 2
Table 1-2 Description on the fields of the display mac-address command
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)
display port-mac
Syntax
display port-mac
View
Any view
Parameters
None
Description
Use the display port-mac command to display the configured start port MAC address for the Ethernet
ports on the switch, that is, the MAC address of Ethernet 1/0/1.
Related commands: port-mac.
VLAN ID STATE
1 Learned
VLAN ID STATE
1 Learned
1 Learned
1 Learned
1 Learned
1 Learned
1 Learned
1 Learned
MAC address
ID of the VLAN to which the network device identified by the MAC address
belongs
The state of the MAC address entry, which can be one of the following:
Config static: Indicates a manually configured static address entry.
Learned: Indicates a dynamically learnt address entry.
Config dynamic: Indicates a manually configured dynamic address entry.
Blackhole: Indicates a blackhole entry.
Outgoing port out of which the traffic destined for the MAC address should be
sent.
Indicates whether the MAC address entry is aging. AGING indicates that the
entry is aging; NOAGED indicates that the entry will never age out.
PORT INDEX
Ethernet1/0/1
PORT INDEX
Ethernet1/0/4
Ethernet1/0/4
Ethernet1/0/4
Ethernet1/0/4
Ethernet1/0/4
Ethernet1/0/4
Ethernet1/0/4
Description
1-3
AGING TIME(s)
AGING
AGING TIME(s)
AGING
AGING
AGING
AGING
AGING
AGING
AGING