Display Trapbuffer - H3C S3100 Series Command Manual

display trapbuffer

Syntax
display trapbuffer [ unit unit-id ] [ size buffersize ]
View
Any view
Parameter
unit-id: Unit ID of the device, the value can only be 1.
size buffersize: Specifies the size of the trap buffer (number of messages the buffer holds) you want to
display. The buffersize argument ranges from 1 to 1,024 and defaults to 256.
Description
Use the display trapbuffer command to display the status of the trap buffer and the records in the trap
buffer.
Absence of the size buffersize argument indicates that all trap information is displayed.
Example
# Display the status of the trap buffer and the records in the trap buffer.
<Sysname> display trapbuffer
Trapping Buffer Configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 6
#Apr 1 23:55:52:263 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227641, ifAdminStatus is 1, ifOperStatus
is 1
#Apr 2 00:17:47:875 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.3(linkDown): portIndex is 4227833, ifAdminStatus is 2, ifOperStatus
is 2
......
<Omitted>
info-center channel name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.
1-5