Multicast Static-Router-Port; Multicast Static-Router-Port Vlan - H3C S3100 Series Command Manual

multicast static-router-port

Syntax
multicast static-router-port interface-type interface-number
undo multicast static-router-port interface-type interface-number
View
VLAN view
Parameters
interface-type interface-number: Specifies a port by its type and number.
Description
Use the multicast static-router-port command to configure the specified port in the current VLAN as a
static router port.
Use the undo multicast static-router-port command to remove the specified port in the current VLAN
as a static router port.
By default, a port is not a static router port.
Examples
# Configure Ethernet 1/0/1 in VLAN 10 as a static router port.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 10
[Sysname-vlan10] multicast static-router-port Ethernet1/0/1

multicast static-router-port vlan

Syntax
multicast static-router-port vlan vlan-id
undo multicast static-router-port vlan vlan-id
View
Ethernet port view
Parameters
vlan-id: VLAN ID the port belongs to, in the range of 1 to 4094.
Description
Use the multicast static-router-port vlan command to configure the current port as a static router port
and specify the VLAN the port belongs to.
Use the undo multicast static-router-port vlan command to restore the default.
By default, no port is configured as a static router port.
Note that:
The impact of the configuration depends on whether the current port belongs to a multicast VLAN and
whether the port belongs to the specified VLAN.
If the current port belongs to neither a multicast VLAN nor the specified VLAN, the configuration
does not take effect.
1-18