H3C S3100 Series Command Manual page 1031

Interface : Vlan-interface1
Destination: 2008::32/128
NextHop : ::1
Interface : InLoopBack0
Destination: FE80::/10
NextHop : ::
Interface : NULL0
Table 1-10 Description on the fields of the display ipv6 route-table command
Field
Destinations
Routes
Destination
Protocol
NextHop
Interface
# Display detailed information about the routing table.
<Sysname> display ipv6 route-table verbose
Routing Table:
Destinations : 2
Destination: ::
NextHop : 1:1:4::1
Interface : Vlan-interface1
Destination: ::1
NextHop : ::1
Interface : InLoopBack0
Table 1-11 Description on the fields of the display ipv6 route-table verbose command
Field
Destinations
Routes
Destination
PrefixLength
NextHop
Protocol
Interface
State
Number of reachable destination networks/hosts
Number of routing entries
Destination network/host IPv6 address. The part following "/" indicates
the prefix length.
Routing protocol discovering the route
Next hop address
Egress interface, through which a packet is sent.
Routes : 2
Number of reachable destination networks/hosts
Number of routing entries
Destination network/host IPv6 address.
Prefix length of the destination IPv6 address
Next hop address
Routing protocol discovering the route
Egress interface
Routing entry state: Active (valid route) or Inactive (invalid route).
1-15
Protocol: Direct
Protocol: Direct
Description
PrefixLength: 0
Protocol : Static
State : Active
PrefixLength: 128
Protocol : Direct
State : Active
Description