Display Cfd Remote-Mep - H3C S3100 Series Command Manual

Maintenance association: matest6
Table 1-9 display cfd mp command output description
Interface Ethernet1/0/1 VLAN 100
MEP ID
MIP
Level
Service instance
Direction
Maintenance domain
Maintenance association

display cfd remote-mep

Syntax
display cfd remote-mep service-instance instance-id mep mep-id
View
Any view
Default Level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a remote MEP, ranging from 1 to 8191.
Description
Use the display cfd remote-mep command to display the information of a remote MEP.
Examples
# Display the information of remote MEP 10 in service instance 4.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address
20 00E0-FC00-6565
30 00E0-FC27-6502
40 00E0-FC00-6510
50 00E0-FC52-BAA0
60 0010-FC00-6502
Table 1-10 display cfd remote-mep command output description
Field
MEP ID
MAC Address
Field
State
OK
OK
FAILED
OK
OK
ID of the remote MED
MAC address of the remote MEP device
MP configuration of the specified VLAN on the
specified port
ID of the MEP
A MIP in the MP
MD level that an MP belongs to
Service instance to which the MP belongs
Direction of the MP
MD to which an MP belongs
MA to which an MP belongs
Time
2006/03/06 02:36:38
2006/03/06 02:36:38
2006/03/06 02:36:39
2006/03/06 02:36:44
2006/03/06 02:36:42
Description
1-23
Description
MAC Status
UP
DOWN
DOWN
DOWN
DOWN