Display Connection - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:

Table of Contents

interface interface-type interface-number: Cuts down all user connections under a specified port. Here,

interface-type is a port type and interface-number is a port number.

ip ip-address: Cuts down all user connections with a specified IP address.

ipv6 ipv6-address: Cuts down all user connections with a specified IPv6 address.

mac mac-address: Cuts down the user connection with a specified MAC address. Here, mac-address is

in H-H-H format.

radius-scheme radius-scheme-name: Cuts down all user connections using a specified RADIUS

scheme. Here, radius-scheme-name is a string of up to 32 characters.

vlan vlan-id: Cuts down all user connections of a specified VLAN. Here, vlan-id ranges from 1 to 4094.

ucibindex ucib-index: Cuts down the user connection with a specified connection index. Here,

ucib-index ranges from 0 to 1047.

user-name user-name: Cuts down the connection of a specified user. Here, user-name is a string of up

to 184 characters..

Use the cut connection command to forcibly cut down one user connection, one type of user

connections, or all user connections.

This command cannot cut down the connections of Telnet and FTP users.

Related commands: display connection.

# Cut down all user connections under the ISP domain aabbcc.net.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] cut connection domain aabbcc.net

display connection

display connection [ access-type { dot1x | mac-authentication } | domain isp-name | interface

interface-type interface-number | ip ip-address | ipv6 ipv6-address | mac mac-address |

radius-scheme radius-scheme-name | hwtacacs-scheme hwtacacs-scheme-name | vlan vlan-id |

ucibindex ucib-index | user-name user-name ]

access-type { dot1x | mac-authentication }: Displays user connections of a specified access type.

Here, dot1x is used to display all 802.1x user connections, and mac-authentication is used to display

all MAC authentication user connections.

domain isp-name: Displays all user connections under specified ISP domain. Here, isp-name is the

name of an ISP domain, a string of up to 128 characters. You can only specify an existing ISP domain.

interface interface-type interface-number: Displays all user connections on a specified port.

Table of Contents