Display Ipv6 Neighbors - H3C S3100 Series Command Manual

Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display ND snooping entries of VLAN 1.
<Sysname> display ipv6 nd snooping
IPv6 Address
4001::1
---- Total entries on VLAN 1: 1 ----
Table 1-8 display ipv6 nd snooping command output description
Field
Interface
Aging
Status
Apply
Total entries on VLAN 1

display ipv6 neighbors

Syntax
display ipv6 neighbors { ipv6-address | all | dynamic | static | interface interface-type
interface-number | vlan vlan-id } [ | { begin | exclude | include } regular-expression ]
View
Any view
Parameters
ipv6-address: IPv6 address whose neighbor information is to be displayed.
all: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
interface interface-type interface-number: Displays information of the neighbors of a specified
interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN, in the range of 1 to 4094.
|: Uses a regular expression to match neighbor entries.
regular-expression: A case-sensitive string for matching.
begin: Displays the first matching neighbor entry and all the neighbor entries following it.
exclude: Displays the neighbor entries not matching the specified regular expression.
include: Displays the neighbor entries matching the specified regular expression.
MAC Address VID
0015-e944-a947 1
Receiving port of an ND snooping entry
Aging time of an ND snooping entry, in minutes.
ND snooping entry status, which can be Bound or Probe.
When the ND snooping feature is used together with the IPv6 filtering feature,
this field displays Fail if the entry cannot be used due to insufficient ACL
resources. In other cases, this field is null.
Total number of ND snooping entries of VLAN 1.
1-12
Interface Age
Ethernet1/0/2 25
Description
Status Apply
Bound