Display Hwping Statistics - H3C S3100 Series Command Manual

The description on a specific field is available for the test results of all types of tests, so that not the
description on the output information of all types of tests is provided here.

display hwping statistics

Syntax
display hwping statistics [ administrator-name operation-tag ]
View
Any view
Parameters
administrator-name: Name of the administrator creating the test.
operation-tag: Test operation tag.
Description
Use the display hwping statistics command to display test statistics.
After a test begins, if all the probes in the first test have not been finished, when you use the command
to view statistics, all statistics results will be 0.
Examples
# Display the statistics information for admin jitter test group, the test type of which is jitter.
<Sysname> display hwping statistics admin jitter
HWPing entry(admin admin, tag jitter) statistics record:
No. :
Destination ip address:
StartTime:
LifeTime:
Send operation times:
Max Round Trip Time:
Sum Round Trip Time:
Square-Sum of Round Trip Time: 0
Disconnect operation number: 0
System busy operation number:0
Operation sequence errors:
Other operation errors:
Jitter result:
Min Positive SD:0
Max Positive SD:0
Positive SD Number:0
Positive SD Sum:0
Positive SD average:0
Positive SD Square Sum:0
Min Negative SD:0
Max Negative SD:0
Negative SD Number:0
Negative SD Sum:0
Negative SD average:0
1
169.254.10.3
2000/1 /2 3 :12:44
21
0
0
0
0
0
Receive response times:
Min Round Trip Time:
Average Round Trip Time:
Packet lost in test:
Operation timeout number: 0
Connection fail number:
Drop operation number:
Min Positive DS:0
Max Positive DS:0
Positive DS Number:0
Positive DS Sum:0
Positive DS average:0
Positive DS Square Sum:0
Min Negative DS:0
Max Negative DS:0
Negative DS Number:0
Negative DS Sum: 0
Negative DS average:0
1-11
0
0
0
0%
0
0