H3C S3100 Series Command Manual page 870

1
FTP and SFTP Configuration Commands
FTP Server Configuration Commands
display ftp-server
Syntax
display ftp-server
View
Any view
Parameters
None
Description
Use the display ftp-server command to display the FTP server-related settings of a switch when it
operates as an FTP server, including startup status, number of users, and so on.
You can use this command to verify FTP server-related configurations.
Related commands: ftp server enable, ftp timeout.
Examples
# Display the FTP server-related settings of the switch (assuming that the switch is operating as an FTP
server).
<Sysname> display ftp-server
FTP server is running
Max user number
User count
Timeout value(in minute)
Table 1-1 display ftp-server command output description
FTP server is running
Max user number
User count
Timeout value (in minute)
1
0
30
Field
1
0
30
The FTP server is started. If the FTP server is not started, "%
FTP server has been stopped" will be displayed, and the three
fields below will not be displayed.
The FTP server can accommodate up to one user.
The current login user number is 0.
The connection idle time is 30 minutes.
1-1
Description