H3C S3100 Series Command Manual page 674

Ethernet1/0/1
reflector port: Ethernet1/0/2
remote-probe vlan: 10
# Display the configurations of a remote destination mirroring group on your S3100-EI series Ethernet
switch.
<Sysname> display mirroring-group 1
mirroring-group 1:
type: remote-destination
status: active
monitor port: Ethernet1/0/3
remote-probe vlan: 20
Table 1-1 Description on the fields of the display mirroring-group command
mirroring-group
type
status
mirroring port
both/inbound/outbound
monitor port
reflector port
remote-probe vlan
mirroring-group
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
View
System view
inbound
Field
Port mirroring group number.
Port mirroring group type, which can be local,
remote-source, or remote-destination.
Status of the port mirroring group, which can be
active or inactive.
Source port in port mirroring. This field is
available only for local mirroring groups or
remote source mirroring groups.
The direction of the mirrored packets, which can
be one of the following:
both: means packets received on and sent
from the mirroring port are mirrored.
Inbound: means packets received on the
mirroring port are mirrored.
outbound: means packets sent from the
mirroring port are mirrored.
Destination port. This field is available only for
local mirroring groups and remote destination
mirroring groups.
Reflector port. This field is available only for
remote source mirroring groups.
Remote probe VLAN. This field is available only
for remote source/destination mirroring groups.
1-2
Description