Mld-Snooping Max-Response-Time; Mld-Snooping Overflow-Replace - H3C S3100 Series Command Manual

[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping last-listener-query-interval 3

mld-snooping max-response-time

Syntax
mld-snooping max-response-time interval
undo mld-snooping max-response-time
View
VLAN view
Default Level
2: System level
Parameters
interval: Maximum response time for MLD general queries, in units of seconds. The effective range is 1
to 25.
Description
Use the mld-snooping max-response-time command to configure the maximum response time for
MLD general queries in the VLAN.
Use the undo mld-snooping max-response-time command to restore the default setting.
By default, the maximum response time for MLD general queries is 10 seconds.
This command takes effect only if MLD snooping is enabled in the VLAN.
Related commands: mld-snooping enable, max-response-time, mld-snooping query-interval.
Examples
# Enable MLD snooping and set the maximum response time for MLD general queries to 5 seconds in
VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping max-response-time 5

mld-snooping overflow-replace

Syntax
mld-snooping overflow-replace [ vlan vlan-list ]
undo mld-snooping overflow-replace [ vlan vlan-list ]
View
Ethernet interface view
Default Level
2: System level
2-15