H3C S3100 Series Command Manual page 1063

2 3002::1 10 ms 10 ms 0 ms
3 * * *
Table 2-2 Description on the fields of the tracert ipv6 command
Field
traceroute to 3002::1
30 hops max
60 bytes packet
press CTRL_C to break
1 3003::1 30 ms 0 ms 0 ms
3 * * *
Traceroute the device at 3002::1 to view the passed route
Maximum hops, which can be configured using the -m argument.
Number of bytes in a probe packet
Press Ctrl + C to terminate the tracert operation after the tracert ipv6
command is executed.
Probe result for sending packets with TTL 1, including IPv6 address of
the device and round-trip response times of three probe packets.
The number of probe packets sent each time can be configured using
the -q argument.
The device three hops away has no response.
2-5
Description