Display Multicast-Source-Deny; Mac-Address Multicast Interface - H3C S3100 Series Command Manual

Table 5-1 display mac-address multicast static command output description
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)

display multicast-source-deny

Syntax
display multicast-source-deny [ interface interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display multicast-source-deny command to display the multicast source port suppression
status.
With neither a port type nor a port number specified, the command displays the multicast source
port suppression status of all the ports on the switch.
With only a port type specified, the command displays the multicast source port suppression status
of all ports of that type.
With both a port type and a port number specified, the command displays the multicast source port
suppression status of the specified port.
Related commands: multicast-source-deny.
Examples
# Display the multicast source port suppression status of Ethernet 1/0/1.
<Sysname> display multicast-source-deny interface Ethernet 1/0/1
Ethernet1/0/1
The information above shows that multicast source port suppression is disabled on Ethernet 1/0/1.

mac-address multicast interface

Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]
MAC address
The VLAN in which the MAC address is manually added
State of the MAC address, which includes only Config static, indicating that
the table entry is manually added.
Ports out which the multicast packets destined for the multicast MAC
address are forwarded
Remaining lifetime of the entry. NOAGED indicates that the entry never
expires.
Multicast-source-deny disabled.
Description
5-2