Display Cfd Meplist - H3C S3100 Series Command Manual

Field
NextSeqNumber
SendLTR
ReceiveLTM
No CCM from some remote
MEPs is received.
One or more streams of error
CCMs is received. The
last-received CCM:
Maintenance domain
Maintenance association
MEP
Sequence Number
Received Time
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Some other MEPs are
transmitting the RDI bit.

display cfd meplist

Syntax
display cfd meplist [ service-instance instance-id ]
View
Any view
Default Level
1: Monitor level
Parameters
service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767.
Description
Use the display cfd meplist command to display the MEP list in a service instance.
Note that, if the service instance ID is not specified, this command displays MEP lists in all service
instances.
Examples
# Display the MEP list in service instance 5.
<Sysname> display cfd meplist service-instance 5
Service instance: 5:
MEP list: 1 to 20, 30, 50.
Sequence number of the next LTM to be sent
Number of LTRs sent. If the MEP is inward-facing, the number of LTRs will not
be counted.
Number of LTMs received
Failure to receive CCMs from some remote MEPs (This information is
displayed only when some CCMs are lost.)
Display the content of the last CCM when one or more error CCMs are
received. (This information is displayed only when error CCM(s) is/are
received.)
MD of the last error CCM message
MA of the last error CCM message
ID of the MEP that sent the last error CCM message
Sequence number of the last error CCM
Time when the last error CCM is received
Cross-connect CCMs are received, and the content of the last cross-connect
CCM is displayed. (This information is displayed only when cross-connect
CCM(s) is/are received.)
CCMs with RDI bits misplaced are received from other MEPs. (This
information is displayed only when this type of CCM(s) is/are received.)
1-21
Description