Oam Timer Keepalive - H3C S3100 Series Command Manual

Note that, after the timeout timer for an Ethernet OAM connection expires, the local OAM entity ages
out its connection with the peer OAM entity, causing the OAM connection to be disconnected.
Therefore, you are recommended to set the connection timeout timer at least five times the
handshake packet transmission interval, thus ensuring the stability of Ethernet OAM connections.
Related commands: oam timer keepalive, display oam configuration.
Examples
# Set the Ethernet OAM handshake packet transmission interval to 200 milliseconds (assume that the
Ethernet OAM connection timeout timer is 1000 milliseconds).
<Sysname> system-view
[Sysname] oam timer hello 200

oam timer keepalive

Syntax
oam timer keepalive interval
undo oam timer keepalive
View
System view
Default Level
2: System level
Parameters
interval: Ethernet OAM connection timeout timer, in milliseconds. The value of this argument must be
a multiple of 100, while the value range of this argument depends on your device model.
Description
Use the oam timer keepalive command to configure the Ethernet OAM connection timeout timer.
Use the undo oam timer keepalive command to restore the default.
By default, the Ethernet OAM connection timeout timer is 5000 milliseconds.
Note that, after the timeout timer for an Ethernet OAM connection expires, the local OAM entity ages
out its connection with the peer OAM entity, causing the OAM connection to be disconnected.
Therefore, you are recommended to set the connection timeout timer at least five times the
handshake packet transmission interval, thus ensuring the stability of Ethernet OAM connections.
Related commands: oam timer hello, display oam configuration.
Examples
# Set the Ethernet OAM connection timeout timer to 1000 milliseconds (assume that the Ethernet
OAM handshake packet transmission interval is 200 milliseconds).
<Sysname> system-view
[Sysname] oam timer keepalive 1000
1-17