H3C S3100 Series Command Manual page 1073

1
Smart Link Configuration Commands
Currently, only S3100-EI series Ethernet switches support the smart link feature.
Smart Link Configuration Commands
display smart-link flush
Syntax
display smart-link flush
View
Any view
Parameter
None
Description
Use the display smart-link flush command to view the information about how the Smart Link device
processes flush messages.
Example
# Display the information about how the Smart Link device processes flush messages.
<Sysname> display smart-link flush
Flush interface :Ethernet1/0/1
Count of flush packets received
Time of last flush packet received
Source MAC of last flush packet received
Device ID of last flush packet received
Control VLAN ID of last flush packet received : 1
Table 1-1 Description on the fields of the display smart-link flush command
Flush interface
Count of flush packets received
Field
: 1
: 22:52:23 2006/04/01
: 000f-e20f-5566
: 000f-e20f-5566
Description
Interface that receives the latest legal flush message
Total number of flush messages received
1-1