Authorization Login; Authorization Vlan - H3C S3100 Series Command Manual

authorization login

Syntax
authorization login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none }
undo authorization login
View
ISP domain view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization. In this case, an authenticated user is automatically
authorized with the default rights.
Description
Use the authorization login command to configure the authorization method for login users.
Use the undo authorization login command to restore the default.
By default, the default authorization method is used for login users.
Note that the HWTACACS scheme specified for the current ISP domain must have been configured.
Related commands: authorization, hwtacacs scheme, radius scheme.
Examples
# Configure the default ISP domain system to use local authorization for login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization login local
# Configure ISP domain test to use HWTACACS authorization scheme hwt for login users and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login hwtacacs-scheme hwt local

authorization vlan

Syntax
authorization vlan string
undo authorization vlan
View
Local user view
1-11