Display Dns Ipv6 Dynamic-Host - H3C S3100 Series Command Manual

Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all DHCPv6 snooping entries.
<Sysname>display dhcp-snooping ipv6 all
DHCP-Snooping IPV6 is enabled.
The client binding table for all untrusted ports.
Type : T--True , F--False
Unit ID : 1
Type IP Address
==== ========================= =============== ========= ==== =================
--- 0 dhcp-snooping Ipv6 item(s) of unit 1 found

display dns ipv6 dynamic-host

Syntax
display dns ipv6 dynamic-host
View
Any view
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display IPv6 dynamic domain name information
in the cache, including the domain name, IPv6 address, and TTL of the DNS entries.
You can use the reset dns ipv6 dynamic-host command to clear all IPv6 dynamic domain name
information from the cache.
Examples
# Display IPv6 dynamic domain name information in the cache.
<Sysname> display dns ipv6 dynamic-host
No. Domain-name
1 aaa
Table 1-1 Description on the fields of the display dns ipv6 dynamic-host command
No.
Domain-name
IPv6 Address
TTL
MAC Address
IPv6 Address
2001::2
Field
Sequence number
Domain name
IPv6 address of the corresponding domain name
Time-to-live of the domain name in the cache in seconds
Remaining VLAN Interface
lease
---
Description
1-5
TTL
6