Rule Comment - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:

Table of Contents

Use the undo rule command to remove an ACL rule.

To remove an ACL rule, you need to specify the ID of the ACL rule. You can use the display acl

command to view the ID of an ACL rule.

You can modify any existent rule of an IPv6 ACL. If you modify only the action to be taken or the

time range, the unmodified part of the rule remains the same. If you modify the content of a

user-defined string, the new string overwrites the original one.

If you do not specify the rule-id argument when creating an ACL rule, the rule will be numbered

automatically. If the ACL has no rules, the rule is numbered 0; otherwise, the number of the rule will

be the greatest rule number plus one. If the current greatest rule number is 65534, however, the

system will display an error message and you need to specify a number for the rule.

The content of a modified or created rule cannot be identical with that of any existing rule of the

ACL; otherwise the rule modification or creation will fail, and the system will prompt that the rule

already exists.

To specify the src-port or dest-port keyword for a rule, you need to specify the ip-protocol

rule-string rule-mask combination as TCP or UDP, that is, 0x06 or 0x11. To specify the

icmpv6-type or icmpv6-code keyword for a rule, you need to specify the ip-protocol rule-string

rule-mask combination as ICMPv6, that is, 0x3a.

Note the following when assigning an IPv6 ACL to the hardware on S3100-EI Series Ethernet switches:

IPv6 ACLs do not match IPv6 packets with extension headers.

Do not use IPv6 ACLs with VLAN mapping and trusted port priority.

# Configure an rule for IPv6 ACL 5000, denying packets sent from 3001::1/64 to 3002::1/64.

<Sysname> system-view

[Sysname] acl number 5000

[Sysname-acl-user-5000] rule deny src-ip 3001::1 64 dest-ip 3002::1 64

rule comment

rule rule-id comment text

undo rule rule-id comment

Advanced ACL view, Layer 2 ACL view, IPv6 ACL view

rule-id: ID of the ACL rule, in the range of 0 to 65534.

Table of Contents