Server-Type - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:
Table of Contents

Advertisement

View
RADIUS scheme view
Parameters
ip-address: IP address of the secondary authentication/authorization server to be used, in dotted
decimal notation.
ipv6 ipv6-address: IPv6 address of the secondary authentication/authorization server.
port-number: UDP port number of the secondary authentication/authorization server, ranging from 1 to
65535.
key string: Specifies the shared key for exchanging authentication/authorization packets with the
secondary RADIUS authentication/authorization server. A shared key is a case-sensitive string of 1 to
16 characters.
Description
Use the secondary authentication command to set the IP address, port number and shared key of the
secondary RADIUS authentication/authorization server to be used by the current scheme.
Use the undo secondary authentication command to restore the default IP address and port number
of the secondary RADIUS authentication/authorization server, which is 0.0.0.0 and 1812 respectively.
Note that:
Up to 16 secondary authentication/authorization servers are supported in a RADIUS scheme.
You can configure a shared key for the secondary authentication/authorization server by specifying
key string in this command. The shared key configured in this command is used in preference. If
key string is not configured here, the shared key configured in the key command in RADIUS
scheme view will be used.
The IP addresses of the primary and secondary authentication/authorization servers cannot be the
same. Otherwise, the configuration fails.
Related commands: key, radius scheme, state.
Examples
# Set the IP address and UDP port number of the secondary authentication/authorization server for
RADIUS scheme radius1 to 10.110.1.2 and 1812 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812

server-type

Syntax
server-type { extended | standard }
undo server-type
View
RADIUS scheme view
1-58

Advertisement

Table of Contents
loading

Table of Contents